The Ovalisation of Steel Circular Hollow Sections under Bending
DIYALA JOURNAL OF ENGINEERING SCIENCES,
Volume 11, Issue 1, Pages 12-19
AbstractThis paper investigates the ovalisation behavior of the Steel Circular Hollow Sections (CHSs) when subjected to bending moment. The experimental program included testing of ten specimens in four groups in order to examine the influence of changing the diameter, thickness, length and the presence of openings on the ovalisation phenomenon of these specimens.
The experimental results showed that the ovalisation of the specimen cross-section appears clearly when the diameter to thickness ratio (D/t) is ranging from 17 to 50, while the ovalisation of the specimens that have D/t ratio greater than 50 is very little or unclear because the instability of these specimens are controlled by the local buckling. In addition, the change of the specimen length and the presence of openings didn’t cause the cross-section ovalisation.
- Article View: 193
- PDF Download: 103